CARDIOSTRONG TX90 Assembly And Operating Instructions Manual page 20

Unfolding the treadmill
1. Make sure there is enough space to set up the treadmill: at least 1 m on both sides and to the front
and at least 2 m behind the equipment for safety reasons. If the user starts to fall, there is enough
space to leave the treadmill.
2. Make sure that nothing is standing next to or on top of the treadmill that can be spilled or thrown
or that makes it impossible to unfold the treadmill.
3. Stand behind the treadmill. Press the equipment slightly forward towards the display and slightly
press the upper part of the hydraulic brake forward with your left foot until the lock releases and the
treadmill can be pulled backward.
4. The hydraulic brake will slowly lower independently. You should still hold on to the treadmill until
it has lowered 2/3 of the way. Pay attention to an appropriate lifting technique, bend your knees and
keep your back straight.
Horizontal alignment
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the
main frame.
1. Lift the treadmill on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and to raise the running surface.
3. Rotate them counterclockwise in order to lower the running surface.
down
up
TX90
20