GIRBAU ED460 Installation Instructions Manual page 59

CAUTION!
THE GAS VALVE ADJUSTMENT MUST BE LEFT UNALTERED.
 Replace and secure ALL the covers.
 Start up the machine and select a program with temperature to cause the burner to ignite (see directions in
Chapter 8).
 Based on the result of the analysis of the combustion gases, if necessary, adjust the position of the
deflector until the correct amount of combustion is obtained.
Adjusting the position of the deflector
TYPE OF GAS
NATURAL
PROPANE 37 mbar / 14.85 in.wc
PROPANE 50 mbar / 20.07 in.wc
Connecting the machine
ED1250
mm
(in)
20
(0.79)
43
(1.69)
23
(0.90)
59
Code No. 549758
Rev. nº 10/0418