Connecting the machine
50
Connect the power supply cable to the terminals of the breaker switch. (Fig. 5.3: Models with gas or steam
heating; Fig. 5.4: Machines with electric heating).
Fig. 5.3
Fig. 5.4
Replace the covers protecting the terminals.
Connect the earth cable.
Assemble all the covers and fix them. Assemble the switch handle.
Check that the cable or the cable protection conduit is correctly attached to the back cover of the machine.
CAUTION!
The earth connection cable is a protection device. Attach it correctly.
Code No. 549758
Rev. nº 10/0418