Turning Off - Sony PCS-3000 Operating Instructions Manual

Menus
Turning the System On/Off

Turning Off

The Rollabout Package power status
3-2
Chapter 3 Conducting a Meeting
The following describes how to turn off the PCS-3000/3000P Rollabout
Package.
1
Display the MAIN menu, QUICK menu, or QUICK DIAL menu.
For details on displaying a menu, see "Switching Menus" on page 1-5.
MAIN menu
INPUT MULTI
QUICK
MENU
QUICK menu
MAIN
P in P
OBJECT
MENU
PRESET
QUICK DIAL menu
# 1
MAIN QUICK
MENU MENU
# 6
2
When in the MAIN menu, select [END OF MEETING] and then select
[SYSTEM OFF].
When in the QUICK or QUICK DIAL menu, select [SYSTEM OFF]
and then select [OK].
The Rollabout Processor, camera unit, and TV monitor are all turned
off and the whole system goes into standby.
SYSTEM OFF
HANG UP
END OF
MEETING
The POWER switches on the Rollabout Processor and on the camera
unit should remain in the ON position after you turn off the system.
This allows you to start the system and display the menu instantly when
you press the POWER ON button on the Remote Commander. If the
Rollabout Processor POWER switch is turned off, the system will not
be able to receive calls from a remote party.
When the system is in standby, you can turn the system on with the
POWER ON button on the Remote Commander, and turn the power off
from the on-screen menus.
Note
If you do not use the system for an extended period, turn off the POWER
switch.
P in P CAMERA SEND AUDIO OTHER
FAR
END
A B C D E F
# 2 # 3 # 4 # 5
# 7 # 8 # 9 # 10
OK
SYSTEM
OFF
END OF
MEETING
SYSTEM
OFF
SYSTEM
OFF