Sony PCS-3000 Operating Instructions Manual page 31

2
Select [MANUAL DIAL] from the OTHER sub-menu.
The MANUAL DIAL menu appears.
MANUAL DIAL
A1
A2
B1
B2
1
4
GHI
7
PQRS
3
Enter the line number of the remote party.
Enter the line number of the remote party A on A1 line, of the party B
on A2 line. Use an asterisk (*) to add a sub address. Only numbers can
be used. (When you have not installed the optional PCS-I300 BRI
Board, you cannot enter the numbers on B1 and B2 lines.)
The way to use on-screen keyboards in the MANUAL DIAL menu is the same
as one in the DIAL LIST menu. For details, see "To use the on-screen
keyboard" on page 2-5.
4
Select [LINE I/F] to set the line interface to [BRI-M].
5
Select [LINE RATE] to set the transfer rate and [AUDIO BAND] to
set the audio bandwidth.
For details on the line interface and transfer rate, see page 2-4.
Note
You cannot set [T.120/H.281] and [VIDEO MODE].
6
Select [DIAL].
The system starts dialing the selected party.
Once connection has been made with all parties, the TV monitor screen
splits into four sections to display the remote parties as well as your
own group. The MAIN menu appears and the remote parties can be
heard over the sound system.
The lines of each party are connected automatically (A connects with
B).
Once all connections have been made, you can start the meeting.
Party A
Local party
BRI
AUTO LINE RATE
7K AUDIO BAND
OFF T.120/H.281
H.261
VIDEO MODE
15FPS
2 3
delete clear
ABC DEF
5 6
copy
JKL MNO
8 9
DIAL
TUV WXYZ
0 #
Party B
Chapter 1 Using the Basic System
LINE I/F
EXIT
1-23