Sony PCS-3000 Operating Instructions Manual page 104

Location and Function of Parts and Controls
Camera Unit
Note
Do not connect any equipment to the AUDIO OUT,
VIDEO OUT, VISCA OUT, and MIC connectors.
1 Caution lamp
2 POWER lamp
7 CAMERA NO. switch
8 AUDIO OUT jack
9 VIDEO OUT jack
0 S VIDEO OUT jack
1 Caution lamp
This lamp lights up when the camera is not capturing
the memorized subject correctly.
2 POWER lamp
This lamp lights up when the camera is turned on.
3 This lamp does not light up with this system.
4 Remote sensors
When operating the Rollabout Processor with the
Remote Commander, point it toward these sensors.
5 IR OUT switch
This switch must be turned on when the system is
activated.
A-4
Appendix
3
6 TIME button
4 Remote sensors
5 IR OUT switch
!¡ DATE button
!™ BACKUP switch
!£ MIC jack
CAMERA NO.
POWER !¢ POWER switch
MIC
OFF ON
1 2 3
OUT
!∞ DC IN 13.5V jack
DC IN
AUDIO VIDEO S VIDEO IN VISCA OUT
13.5V
!§ VISCA OUT jack
!¶ VISCA IN jack
Camera Unit
6 TIME button
This button is used when setting the clock.
7 CAMERA NO. switch
This switch does not operate with this system.
8 AUDIO OUT jack
This jack cannot be used with this system.
9 VIDEO OUT jack
This jack cannot be used with this system.
0 S VIDEO OUT jack
Connect to the Rollabout Processor with the supplied
camera unit cable.
! ¡DATE button
This button is used when setting the clock.