Table of Contents
Advertisement
Receiving a Call
When a call comes in, the connection process with differs
depending on the setting of the answer mode.
Auto answer mode
The system automatically receives the call and starts the
meeting. However, even if you are not ready to start the
meeting, the local picture will be displayed on the remote
party's monitor screen.
Manual answer mode
Incoming calls are not automatically connected. You must
manually connect the call.
You can start the meeting whenever you are ready.
Notes
• Whichever mode you choose, the Compact Processor must be
• Make sure that the TV monitor is on standby.
• When you have installed the optional PCS-I152 LAN Board,
Setting the Answer Mode
1
2
3
34
Chapter 2 Basic Operation During a Meeting
turned on, or be in standby/sleep mode to receive a call.
and holding a meeting on a LAN, the Compact Processor on
standby cannot receive a call.
Press the MENU button on the Remote Commander.
The Menu (System Configuration) menu appears on the
monitor screen.
Select ANSWER with the joy stick, then press it.
The Answer Setup menu appears on the monitor screen.
Select ANSWER MODE with the joy stick, then press it.
The ANSWER MODE items appear.
Advertisement
Table of Contents
