Top Panel Removal - Maytag MXR65 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove two T-20 screws from the bottom
half of each hinge. These are self-tapping
screws.
Two T-20
Screws
2. Unlock the two locks at the front corners of
the cabinet.

TOP PaNel ReMOval

3. Lift the top panel and slide it back.
4. Grasp the panel from the sides, lift and slide
3-16
the panel off the top of the washer.
NOTe: The top half of each hinge is riveted
to the top panel. If it is necessary to replace
a hinge, rivets would have to be drilled out.
Rivets