Top Cover Removal; Splash Guard Removal; Bleach/Softener Dispenser Removal - Maytag Neptune TL FAV6800A Service

Disassembly Procedures
!

Top Cover Removal

1. Disconnect power supply to unit.
2. Insert a plastic putty knife in line with the lid seam and
push in to release catches on the left and right side.
Top cover is hinged at the rear.

Splash Guard Removal

1. Disconnect power supply to unit.
2. Lift Top Cover.
3. Unsnap Splash Guard by starting in the lower right
corner and working around perimeter until guard is
free.
©2003 Maytag Appliances Company
WARNING
16022808 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.

Bleach/Softener Dispenser Removal

1. Disconnect power supply to unit.
2. Lift lid, and with a putty knife pry on long side of the
triangle to release the cover from tabs underneath.
Push in direction of
arrow while lifting
and rotating cover
up.
3. Reinstall cover by placing onto tabs at point of
triangle. Then rotate down and snap into place across
the long side of the triangle while pushing up on the
reservoir underneath.
33