Back Panel - Maytag MXR65 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove five T-30 screws from each side of
the back panel.
2. Remove two T-30 screws from the top edge
of the panel.
Two T-30
Screws

BaCk PaNel

Five T-30
Screws
3. Loosen the two T-30 screws at the bottom
of the panel.
4. Pull the top of panel away from the washer
and lift the slots off screws at the bottom to
remove panel from washer.
3-46
Two T-30
Screws