Usb Port - Maytag MXR65 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Open the top panel. (See page 3-1)
2. The USB port is in the back left corner,
inside the cabinet, below the fuses.

USB Port

3. Remove two T-20 screws from back panel.
4. Pull the USB port away from the back panel
inside the cabinet.
uSB PORT
5. Open the control panel. (See page 3-2)
6. Disconnect the USB extension cable from
the left end of the display board.
Two T-20
Screws
3-32
USB
Extension