Maytag MXR65 Service Manual page 99

Disconnect power before servicing.
Replace all parts and panels before operating.
Disconnect power before servicing.
Disconnect power before servicing.
Failure to do so can result in death or electrical shock.
Replace all parts and panels before operating.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Failure to do so can result in death or electrical shock.
TeSTinG DOOR lOCk COMpOnenTS FROM
DOOR lOCk COMPONeNT TeSTiNG
DOOR lOCk COMPONeNT TeSTiNG
FROM DOOR lOCk & HaRNeSS PluG
FROM DOOR lOCk & HaRNeSS PluG
To check Door Lock Components
from the plug:
Leave the door lock wire harness
connector on the door lock assembly.
Pin 8
Pin 7
Pin 4
Pin 3
To test the Door Lock Solenoid Coil:
Touch one test lead to pin #1.
Touch other test lead to pin #5.
The meter should indicate 2.9K - 3.1K Ω.
Electrical Shock Hazard
Electrical Shock Hazard
DOOR lOCk & HaRneSS pluG
Pin 5
Pin 1
Electrical Shock Hazard
Testing Door Lock Switches:
To test the Door Components
from the Lock mechanism,
unplug the harness and follow
same test procedures.
To test the Door Closed Switch:
Touch one test lead to pin #4.
Touch other test lead to pin #8.
To test the Door Locked Switch:
Touch one test lead to pin #7.
Touch other test lead to pin #3.
With the door closed or locked, the meter
should indicate continuity (0 Ω)
With the door open, the meter should indicate
open circuit (infinite Ω).
Pin 8
Pin 4
7-3
4-3
4-3
Pin 7 Pin 5
Pin 3 Pin 1
Door Lock
Connection