Communication Status - Ingenico MOVE/5000 User Manual

Communication setup

Communication status

Header bar
When the terminal is powered on, the screen displays a status Header bar consisting of 4 segments:
>
Segment 1: indicates status of 3G connectivity and signal strength if enabled
>
Segment 2: displays Ethernet status
>
Segment 3: shows status of Bluetooth or Wi-Fi connectivity and signal strength if enabled
>
Segment 4: provides terminal information such as System Date and Time, Power and Battery conditions
3G
When GPRS communications is enabled, the status
of the modem is displayed in segment 1:
Is displayed when the terminal
is powered on to indicate 3G
communications is supported.
As the terminal attempts
to register with the mobile
communications provider this
icon is displayed.
When terminal registers with the
network provider it will display
this icon. A 3G signal strength
indicator is also displayed.
Other 3G conditions that may
be displayed: SIM card not
detected; SIM card locked and
entry of code is required.
22
Ethernet
The status of 'Ethernet' communications is
displayed in segment 3 of the status header:
Ethernet is configured
but not enabled
Ethernet communications
enabled