Mounting And Wiring - BEA IXIO-ST INDUSTRIAL Manual

IXIO-ST: INSTALLATION GUIDE
1
MOUNTING & WIRING
Mounting is compatible with the WIZARD.
Sensor is intended to be monitored for proper operation by the door operator or system.
Harness shall be routed separated from any Mains or non-Class 2 voltage cable for correct operation or shall be rated for the Mains voltage,
and suitable protection and routing means shall be used according to National and Local Codes to prevent damage to the harness.
Page 2 of 8
Sensor connectivity (power and relays) must utilize only the supplied harness.
Sensor power must be supplied from a Class 2 supply source limited to 15 W.
12-24 V AC, 50/60 Hz
12-30 V DC
Max 2.5 W
*
*
* Output status when sensor is operational
75.5785.08 IXIO-ST UL INDUSTRIAL 20161220
RED
POWER SUPPLY
BLACK
WHITE
GREEN
AUX INPUT
YELLOW
BROWN
BLUE
SAFETY INPUT
PURPLE
TEST
PURPLE
OUTPUT