Mounting And Wiring - BEA IXIO-DP3 Manual

IXIO-DP3: INSTALLATION GUIDE
1
MOUNTING & WIRING
Fixation is compatible with the ACTIV8.
Mount the sensor securely.
2
RADAR OUTPUT CONFIGURATION
RELAY OUTPUT
not for emergency exits
FREQUENCY OUTPUT
for emergency exits
CURRENT SOURCE OUTPUT
for emergency exits
INVERTED FREQUENCY OUTPUT
for specific door operators (not for emergency exits)
3
RADAR OPENING IMPULSE FIELD
2.2 m
from 15° to 45°, default 30 °
3
NO: normally open
NC: normally closed
field size: 9
immunity: 2
WIDE : 4 m x 2 m
2.2 m
field size: 9
immunity: 2
or
+
-
*
**
* Depending on OUTPUT CONFIGURATION settings
** Current source output for emergency exits
Do not invert polarity!
YE/RED +
YE/BK -
from -15° to 15°, default 0°
The size of the detection field varies according to the mounting height of the sensor.
In emergency exits the full door width must be covered.
DOOR CONTROLLER
RED
POWER SUPPLY +
BLACK
POWER SUPPLY -
YELLOW
OPENING INPUT
YELLOW
PINK/WHITE
SAFETY OUTPUT
PINK/GREY
SAFETY INPUT
YE/RED +
OPENING INPUT
YE/BK -
FOR EMERGENCY
EXITS
OR
field size: 9
immunity: 2
2.2 m
NARROW : 2 m x 2.5 m
2.2 m
field size: 9
immunity: 2
or