Dtu Configuration - Planet VCG-1500WG-LTE User Manual

8.6 DTU Configuration

The series port of wireless gateway (COM/LINE port) is used to configure gateway parameters or restore to default factory
setting. It is used to configure data channel to realize DTU data communication. If control port COM/LINE is used as DTU series
port, it needs to enable "DTU". The following is the explanation of DTU parameter configuration to use COM/LINE port as DTU.
Object
Center Number
Center IP address and
port
Protocol
Figure 8-6-1 DTU Configuration
Description
Input number according to the number of center server, when there is only 1 center
server, please input 1. When there are more center servers, please input the
corresponding number.
When there is only 1 center server, please input 1 in "center number", at this time, it only
needs to configure "Main center IP and port", inputting center server IP and port into
corresponding bars, read picture 4-5-10. If center server doesn't use fixed IP address,
but domain name, please input domain name into corresponding IP address bar. Center
1 Address Port ~Center 4 Address Port don't need to input.
When there are several center servers (main number is more than 1), input
corresponding center server number in "center number", at this time, it needs to
configure "Center 1 Address Port" ~ "Center X Address Port", X is number of center
servers, input all center server IP address and port to corresponding bars, read picture
4-5-10. If center server doesn't use fixed IP address, but domain name, please input
domain name into corresponding IP address bar. In this time, "Main center IP Address
and Port" doesn't need to input.
Set the working protocol. Default is PLANET DTU protocol. If customers need their own
protocol, please select CUSTOM option.
66
User's Manual of VCG-1500WG-LTE