Download Print this page

Planet VCG-1500WG-LTE Quick Installation Manual

Vehicle 4g lte cellular gateway with 5-port 10/100tx
Hide thumbs Also See for VCG-1500WG-LTE:

Advertisement

Quick Links

1. Package Contents

Thank you for choosing PLANET Vehicle 4G LTE Cellular Gateway.
Open the box of the Cellular Gateway and carefully unpack it. The
box should contain the following items:
 VCG-1500WG-LTE x 1
 Quick Installation Guide x 1
 4G LTE Antenna x 1
 2.4G Wi-Fi Antenna x 2
 GPS Antenna x 1
 Ethernet Cable x 1
 Console Cable x 1
 Mounting Kit x 1
 Power Kit x 1
 Antenna Dust Cap x 4
 Copper Dust Cap x 6
If there is any item missing or damaged, please
contact the seller immediately.
Note
Button
Ejector
This button is used to eject the SIM card adapter.
This button is used to restore all the factory default
Reset
settings. Please hold the reset button for about 5
seconds to load default.
Interface
The standard 4-pin vehicle power jack comes with
the input power of 5-32V DC.
Power Jack
Use the power adapter included in the package or
connect to vehicle battery directly.
SIM Slot
Insert the SIM card adapter with SIM card.
TF1/TF2
Store broadcast advertisements for Wi-Fi
Slot
authentication.
USB Port
Connect with external storage.
Console
The port is for testing or debugging.
Port
– 1 –
Function
Description
– 3 –
2. Physical Introduction
 Front Panel
WiFi
PWR
WiFi
3G
4G Internet
Ejector
 Rear Panel
BAT
ACC
GND
GND
Reset
3G/4G
DC 5~32V
USB
Console
LED and button definitions
LED
Color
Lights to indicate that the gateway is
PWR
Red
operating.
Lights to indicate that the Wi-Fi is working.
WiFi
Blue
The Wi-Fi is enabled by default.
Lights to indicate that the SIM card is
3G
Blue
detected via 3G.
Lights to indicate that the SIM card is
4G
Blue
detected via 4G.
Lights to indicate that the gateway is
Internet
Blue
connecting to the Internet.

3. Hardware Installation

Step 1. Insert SIM card adapter into gateway SIM card slot.
A mini card with LTE and WCDMA subscription.
Note
Step 2. Connect 4G LTE antenna, Wi-Fi antennas and GPS antenna
to specified connectors.
Step 3. Power on the gateway.
Step 4. Connect LAN port of the Gateway with PC to configure
parameters and desired function.
1. It is necessary to power off the gateway before
you insert or remove the SIM card.
2. Before inserting the SIM card adapter into SIM
Note
slot, please make sure the SIM card with metal
point is facing down.
Vehicle 4G LTE Cellular Wireless Gateway
VCG-1500WG-LTE
WiFi
SIM
TF1
TF2
4
3
2
1
WAN
Function
– 2 –
– 4 –
ACT
LNK
GPS

Advertisement

loading

Summary of Contents for Planet VCG-1500WG-LTE

  • Page 1: Package Contents

    1. Package Contents 2. Physical Introduction Thank you for choosing PLANET Vehicle 4G LTE Cellular Gateway.  Front Panel Open the box of the Cellular Gateway and carefully unpack it. The Vehicle 4G LTE Cellular Wireless Gateway VCG-1500WG-LTE box should contain the following items:...
  • Page 2: Web Management

    Default Password: admin VCG-1500WG-LTE. For further details on the installation of the cellular gateway, please refer to the user manual which can be downloaded from PLANET website. https://www.planet.com.tw/en/support/downloads?method=category &c1=network-security&p=vcg-1500wg-lte&type=3 If you have further questions, please contact the local dealer or distributor where you purchased this product or you can contact 3.