Planet VCG-1500WG-LTE User Manual page 25

Object
Local Interface 1 (LAN1)
IP Address
Subnet Mask
Local Interface 2 (LAN2)
IP Address
Subnet Mask
Primary DNS/Second DNS
Note:
1. Make sure all IPs connected to equipment are in the same Subnet Mask with gateway.
2. When multi units work in the same LAN, MAC address will restore to default setting after "load default setting". It is easy to
make MAC address conflict with other equipment. So please revise MAC address.
3. If users input DNS server address, after dialing, please check whether DNS used by gateway can decode domain name.
4. Local interface 1 and Local interface 2 can't be in the same subnet mask
Description
Multiplex with WAN -- It can be used to connect with LAN if without using PPPOE
The default setting of the IP address of the gateway LAN1 interface is 192.168.0.1
Set Subnet Mask corresponding local IP address
Used to connect with Wi-Fi and 4-port LAN
The default setting of the IP address of the gateway Wi-Fi and LAN1-4 interface is
192.168.1.1
Set Subnet Mask corresponding local IP address. Default setting of Subnet Mask is
255.255.255.0
It is the domain name decoding server address, and default situation (blank) is
obtained from ISP when gateway dial-up is made. If customer has stable DNS server, it
can input customer stable DNS server address, but we suggest that it is better to
obtain from ISP when gateway dial-up is made.
25
User's Manual of VCG-1500WG-LTE