Table of Contents
Advertisement
Object
Server IP
Remote Subnet, Remote
Subnet Mask
Username/Password
Protocol
Pap
Chap
Any
MPPE
Add default route
Other parameters
Specify Local IP /Specify
Peer IP
Tunnel check interval
(second)/Tunnel check
times
Other parameters
Note: If "default route" is enabled, all data packets will be sent to VPN server, that means equipment can't visit public network.
Please revise "keeping online" parameters according to actual situation. Otherwise, it will be off-line frequently.
Description
Server IP or domain name
Server LAN information
User name and password connected to server
PPTP finishes ppp password validation format. There is the following authentication way
Adopt Pap, which user name and password are plain text transmitted, and the safety
level is low.
adopt Chap
MS-Chap: adopt MS-Chap.
MS-Chap-V2: adopt MS-Chap-V2
Can adopt any one of above mentioned 4 kinds, if there is no special situation, please
adopt this one.
No Mppe: Don't supply MPPE encryption
Mppe (40/128): Supply MPPE function, support MPPE40 and MPPE128 encryption way
Mppe-Stateful: Supply MPPE stateful encryption
If this function is used, all data visited this device will send to PPTP tunnel. Under this
situation, computer host of this device can only visit VPN network.
Don't need to input usually except service requested special negotiation parameters.
If server allows, this device requests from server to specify local IP when ppp link is
established. If server is assigned, it fails to establish tunnel.
Once tunnel is established, device can send interval LCP packets to check the link. If
checking times fail, device will disconnect automatically and restart to connect.
It will be used when special parameters are needed to establish link. It doesn't need to
input usually, except for the services with special negotiation parameters. Parameter
format is: novj; novjcomp, use ";" to separate parameters.
44
User's Manual of VCG-1500WG-LTE
Advertisement
Table of Contents
