Led Indications - Planet VCG-1500WG-LTE User Manual


Reset Button
On the rear of the VCG-1500WG-LTE, the reset button is designed to reset the Vehicle Gateway to factory default.
Reset Button
> 5 sec: Factory Default

2.1.2 LED Indications

The front and real panels' LEDs indicate instant status related to system power, Wi-Fi, 4G and Internet. It helps monitor and
troubleshoot when needed.
 System
LED Color
PWR Red
Wi-Fi Blue
3G Blue
4G Blue
Internet Blue
 10/100BASE-TX Port Interfaces (LAN Port-1 to Port-4, WAN)
LED Color
Green
Ethernet
Orange
Figure 2-3 Reset Button of VCG-1500WG-LTE
Function
Reset the Vehicle Gateway to Factory Default configuration.
Vehicle Gateway will then reboot and load the default settings
shown below:

Default username: admin

Default password: admin

Default IP address: 192.168.1.1

Subnet mask: 255.255.255.0
Lights Indicates the system is working properly.
Lights Indicates the Wi-Fi is working. The Wi-Fi is enabled by default.
Lights Indicates the SIM card is detected via 3G
Lights Indicates the SIM card is detected via 4G.
Lights Indicates the system is connecting to the Internet.
Blinking LNK, indicates that the link is successfully established
Blinking ACT, indicates that the port is operating at 100Mbps
15
User's Manual of VCG-1500WG-LTE
Function
Function