Router Configuration - Planet VCG-1500WG-LTE User Manual

5.3 Router Configuration

Setup system static router setting and display system router information. System default router is to send all data to public
internet. If user wants to visit an appointed network, please add router by hand.
Object
Name
Destination IP address
Subnet Mask
Gateway IP address
Metric
Interface
Note: If router can't be added successfully (add rules successfully, but router information didn't display), please confirm NSID
whether to comply to requirements or not.
Gateway router configuration example:
Click "Apply"to save.
Figure 5-3-1 Route
Description
It is limited to use characters 0-9, a-z and A-Z. Repeating the same name is not possible.
Router destination IP can be host IP address,and also can be IP segment.
The added subnet, if it is the host IP address , please input
255.255.255.255
The next IP of the added router, if gateway is not needed, can be"0.0.0.0"
Default is 0
System interface
40
User's Manual of VCG-1500WG-LTE