Table of Contents
Advertisement
2.1.4 SIM Card Installation
1.
SIM Card Drawer and Eject Button
2.
Inserting and Removing SIM Card
(1)
Before inserting or removing the SIM card, ensure that the power has been turned off and the power connector has
been removed from Vehicle Gateway.
(2)
Press the ejector button with a paper clip or suitable tool to eject the SIM card from the drawer.
(3)
Insert the SIM card with the contacts facing down and align it properly into the drawer. Make sure your direction of
SIM card and put it into the tray.
(4)
Slide the drawer back and lock it in place.
A mini card with LTE and WCDMA subscription.
Please make sure the direction first. When pulling into the SIM tray without putting the correct
direction, the tray will be stuck inside.
Please turn off Vehicle Gateway before removing the SIM card.
Figure 2-6: SIM Card Slot and Ejector
17
User's Manual of VCG-1500WG-LTE
Advertisement
Table of Contents
