3.2.3
Connecting inverters in compliance with EMC regulations
Connect cables at the inverter so that they are EMC compliant
Attach the cable tie holders to the Power Module as shown to the left in the diagram before
you establish the connections.
Fix the line connecting cable using a cable tie as shown in
Fix the shield of the motor connecting cable using a hose clamp (
Connect the shield of the control cable with the shield plate of the Control Unit (
steel band. Also attach the control cable to the Power Module using a cable tie (
SINAMICS G120C, FSD ... FSF inverters
Compact Operating Instructions, 11/2016, FW V4.7 SP6, A5E39339884B AA
3.2 Connecting
①
.
②
).
③
④
Installing
) using a
).
27