Siemens SINAMICS G120C Compact Operating Instructions page 59

No. Description
p0290 Power unit overload response
0 Reduce output current or output frequency
1 No reduction, shutdown when overload
threshold is reached
2 Reduce I_output or f_output and f_pulse (not
using I2t).
3 Reduce the pulse frequency (not using I2t)
12 I_output or f_output and automatic pulse
frequency reduction
13 Automatic pulse frequency reduction
p0292 Power unit temperature alarm threshold [°C]
p0295 Fan run-on time [s]
p0300 Motor type selection
0 No mo-
tor
10 1LE1
19 1LA9
108 1PH8
p0301 Motor code number selection
p0304 Rated motor voltage [V]
p0305 Rated motor current [A]
p0306 Number of motors connected in parallel
p0307 Rated motor power [kW]
p0308 Rated motor power factor
p0309 Rated motor efficiency [%]
p0310 Rated motor frequency [Hz]
p0311 Rated motor speed [rpm]
p0312 Rated motor torque [Nm]
r0313 Motor pole pair number, current (or calculated)
p0320 Motor rated magnetizing current/short-circuit
current [A]
p0322 Maximum motor speed [rpm]
p0323 Maximum motor current [A]
p0325 Motor pole position identification current 1. Phase
[A]
p0329 Motor pole position identification current [A]
r0330 Rated motor slip
r0331 Actual motor magnetizing current/short-circuit
current
r0333 Rated motor torque [Nm]
p0335 Motor cooling type
SINAMICS G120C, FSD ... FSF inverters
Compact Operating Instructions, 11/2016, FW V4.7 SP6, A5E39339884B AA
1 Standard 2 Synchro-
induction nous
motor motor
13 1LG6 17 1LA7
100 1LE1 101 1PC1
271 1FG1 277 1FK7
4.2 Commissioning with BOP-2 operator panel
No. Description
p0340 Automatic calculation of motor/control parameters
p0341 Motor moment of inertia [kgm²]
p0342 Ratio between the total and motor moment of
inertia [kgm²]
p0344 Motor weight (for thermal motor model) [kg]
r0345 Motor rated running-up time [s]
p0346 Motor excitation build-up time [s]
p0347 Motor de-excitation time [s]
p0350 Motor stator resistance, cold [Ω]
p0352 Cable resistance [Ω]
r0394 Rated motor power [kW]
r0395 Actual stator resistance
r0396 Actual rotor resistance
p0500 Technology application
0 Standard drive
2 Encoderless con-
trol up to f = 0
p0501 Technological application (Standard Drive Con-
trol)
0 Constant load
(linear characteris-
tic)
p0502 Technology application (Dynamic Drive Control)
0 Standard drive
(e.g. pump, fan)
5 Heavy starting (e.g. extruders, compres-
sors)
p0505 Selecting the system of units
1 SI
3 US
p0514 Specific scaling, reference values
p0515 Specific scaling, parameter referred to p0514[0]
p0516 Specific scaling, parameter referred to p0514[1]
... ...
p0524 Specific scaling, parameter referred to p0514[9]
p0530 Bearing, type selection
p0531 Bearing, code number selection
p0532 Bearing, maximum speed
p0541 Load gear unit code number
p0542 Load gear unit maximum speed
Commissioning
1 Pumps and fans
2 Pumps and fans,
efficiency optimi-
zation
1 Speed-dependent
load (parabolic
characteristic)
1 Dynamic ap-
proach or revers-
ing
2 Referred/SI
4 Referred/US
59