Siemens SINAMICS G120C Compact Operating Instructions page 19

Connecting the line supply and motor, frame size FSF
Figure 3-5
Remove the lower connection covers.
Use side cutters or a fine saw blade to make openings in the cover for the cables.
You must re-attach the covers in order to re-establish the touch protection of the inverter
after the cables have been connected.
Connecting the braking resistor, frame sizes FSD ... FSF
Procedure
To connect a braking resistor, proceed as follows:
1. Remove the upper inverter cover.
2. Release the two braking resistor terminals.
3. Remove the seal together with the connection cover upwards away from the inverter.
4. Adapt the seal to the cable cross-section.
SINAMICS G120C, FSD ... FSF inverters
Compact Operating Instructions, 11/2016, FW V4.7 SP6, A5E39339884B AA
Connecting the line supply and motor, FSF
Installing
3.2 Connecting
19