Transportation; Contents - Epson E2C Series Manipulator Manual

3.4.2 Transportation

3.4.3 Contents

E2C Rev.6
Transport the Manipulator following the instructions below:
(1) Attach the eyebolts to the top of the Arm #1.
(2) Pass the belts through the eyebolts.
(3) Hoist the Manipulator slightly so that it does not fall. Then, remove the bolts
securing the Manipulator to the delivery equipment or pallet.
(4) Hoist the Manipulator holding it by hand so that it can keep its balance. Then,
move it to the base table.
1. Manipulator
2. Accessories (Standard-model/Cleanroom-model)
Power cable
Signal cable
Connector and Clamp hood for user wiring
Grease for ball screw spline
3. Manual or CD manual
Setup & Operation 3. Environments and Installation
Item Quantity
1
1
2 sets
1
29