Table of Contents
Advertisement
3. Environment and Installation
3.4 Unpacking and Transportation
3.4.1 Unpacking
■ Keep the packaging material and the shipment box in case of need for return.
CAUTION
NOTE
■ Do not remove the part feeding from its packaging until you are ready to install.
Look at the identification sticker at the back of the product and ensure that the product you
have received is the appropriate one.
Important information is on this sticker, such as the power consumption rating and the
type name and serial number that you will need for any kind of correspondence with
Epson.
3.4.2 Packaging of the Product, Transportation and Handling
The transportation of the product must be made in accordance with the specific terms
indicated on the package (top, bottom, fragile, etc.). In addition, pay particular attention to
the following points:
■ Be careful of the weight and take care when transporting the system.
■ Always hold the system firmly with two hands.
■ The operators should not carry heavy shipping boxes by themselves.
■ If the shipping box is to be left standing, it should be in a horizontal position.
CAUTION
■ Do not climb on the shipping box.
■ Do not place heavy objects, on top of the shipping box.
The dimension of packaging box of IF-240 is as follows:
Dimensions
(with optional part)
Weight
Table 3-1: Weight and dimensions of the product when packaged
16
IF-240
460 × 320 × 230 mm
(460 × 320 × 330 mm)
12 kg
Part Feeding 7.0 IF-240 Rev.7
Advertisement
Table of Contents
