Technical Information; Manufacturer's Declaration; Table 9. Electromagnetic Emission - Nonin Avant 9700 Operator's Manual

Technical Information

NOTE: This product complies with ISO 10993-1, Biological Evaluation of Medical
Devices Part 1: Evaluation and Testing.
CAUTION: A functional tester cannot be used to assess the accuracy of a pulse
!
oximeter monitor or sensor.
CAUTION: All parts and accessories connected to the serial port of this device must
!
be certified according to at least IEC Standard EN 60950 or UL 1950 for data-
processing equipment.
CAUTION: Portable and mobile RF communications equipment can affect medical
!
electrical equipment.

Manufacturer's Declaration

Refer to the following table for specific information regarding compliance to IEC 60601-1-2 for
this device.
Emissions Test
This device is intended for use in the electromagnetic environment specified below. The customer and/
or user of this device should ensure that it is used in such an environment.
RF Emissions Group 1
CISPR 11
RF Emissions Class B
CISPR 11
Harmonic Emissions N/A
IEC 61000-3-3
Voltage Fluctuations/ N/A
Flicker Emissions
IEC 61000-3-3
34
Table 9: Electromagnetic Emission
Compliance
This device uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
This device is suitable for use in all establishments, including
domestic and those directly connected to the public low-
voltage power supply network that supplies buildings used
for domestic purposes.
Electromagnetic Environment—Guidance
Technical Information