Table of Contents
Advertisement
(5) To use the polygons, set the Roll, Pitch and Yaw values to a Min of -360 and a Max of 360.
(6) Select the number of polygons that are active for the scanning process. In the prior example two polygons were
loaded. In that case, to scan both of them the value for Polygons is set to two (2).
The following table lists the Parameter and the function within the Capture feature.
Parameter
Prefix/Bar code
Images per frame
Images per cube
Max number of cubes
Figure 3-3. Enable GPS Trigger.
Table 3-10. Capture Parameters.
Adds a prefix to the default file name. Can be populated using a bar code scanner.
Set by user, based on resolution, speed and altitude.
Sets number of Images to Capture (Defines Hyperspectral Image Height). If set to zero
the system will continue taking images until the user clicks the stop button.
Sets the number of data cubes that will be created, each with the number of images set
above. If set to zero, the system will continue creating data cubes until the user clicks
the stop button.
Function
GPS/IMU
49
Hide quick links:
Advertisement
Table of Contents
