Gps Configuration And Polygons - Headwall Nano-Hyperspec Operation Manual

3. 2 GPS CONFIGURATION AND POLYGONS

(1) Power ON the operating computer, if necessary, and connect it to the Internet.
®
(2) Open Hyperspec
(3) On the GPS control, click Capture Polygons button.
When the IMU is moving, the coordinates are displayed on the left side of the screen along with altitude, velocity and time
stamp information. The center panel is a graphical representation of direction, orientation and speed of the tracking unit.
The right side, blue screen, displays a plot of the latitude and longitude points and graphical representations of heading
and velocity. The right side displays the motion tracker's flight path. If polygons are used they are also displayed in the
right side pane. In that case the flight path will be shown over the polygons. Clicking on the Start button will manually
III, if necessary, and click the GPS button.
Figure 3-1. Hyperspec
Figure 3-2. IMU Control and Display.
®
III with GPS.
GPS/IMU
37