Headwall Nano-Hyperspec Operation Manual page 21

Close the Live Video.
Click the Settings button, opening the Settings screen. Click the Sensor tab, shown in the following figure.
The operational details for the numbered sections are in the following table. Verify the settings conform to the system
configuration.
Number
GPS
1
Lidar
Stage
Fodis
Figure 1-20. Settings, Sensor Tab.
Table 1-3. Sensor Settings
Function
Drop down, select IMU used with Nano. This is necessary if the
Nano will be used for aerial scanning.
Drop down, select Lidar used with Nano, if necessary
Drop down, select Stage used with Nano, if necessary
Drop down, select Fodis used with Nano, if necessary
AIRBORNE PACKAGE
Operational Settings
1-17