Multiple Polygons - Headwall Nano-Hyperspec Operation Manual

GPS/IMU

3. 7 Multiple Polygons.

Multiple polygons are created to enable scanning of multiple target areas during a single flight, and is done as follows.
(1) Open the Polygon Tool, Coordinates Map.
(2) Create a single polygon in the desired target area. Notice the GPS coordinates in the Coordinates panel.
(3) Click the New Polygon button. The Coordinates panel becomes blank when the New Polygon button is clicked.
(4) Select a second target area and create a second, polygon. The coordinates for this new polygon appear in the
Coordinates panel, as shown in the following figure.
(5) Click the Export button. The coordinates for both polygons show in the Coordinates panel.
44
Figure 3-1. First Polygon.
Figure 3-2. Two Polygons.