Table of Contents
Advertisement
Do not twist the LEMO connector into the IMU connector. This will damage the pins
and make the cable useless. The LEMO is a push-pull connector.
f. Hold the Nano in place and gently press the two connector pieces together until the connectors appear as below,
Figure 1-15.
g. Once the two halves are pressed together, turn the locking wheel clockwise until it stops. This secures the LEMO
connector into place.
h. Secure the slack cable, if any.
Figure 1-14. Align Red Dots, LEMO and IMU.
CAUTION
Figure 1-15. Secured LEMO-IMU Connectors.
AIRBORNE PACKAGE
1-13
Hide quick links:
Advertisement
Table of Contents
