(6) Click the Apply button.
(a) The Polygon editor closes and the polygon(s) are loaded in to the GPS window of Hyperspec
(b) The current location will be shown as a white X on the map.
(7) Close the GPS window. The polygons can be edited in the future by clicking the Capture Polygons button and
following the previous editing steps.
3. 9 GPS TRIGGERS
Hyperspec
purposes. They do not control or direct the UAV. The UAV control is the sole
responsibility of the operator.
Once the polygons are stored into the Hyperspec
process. The automatic triggering uses the GPS boundary coordinates of the polygons to initiate or stop the scanning
process as the motion tracker moves along the predefined path. Hyperspec
triggering with the following steps.
(1) With the Hyperspec
Figure 3-5. GPS with Loaded Polygons.
WARNING
®
III and the polygon triggering procedures are solely for scanning
®
III application, the GPS coordinates can be used to trigger the scanning
®
III opened, click the Capture button.
®
III is configured to perform the automatic
GPS/IMU
®
III.
47