Huawei UPS5000-E-****-FM series User Manual page 251

UPS5000-E-(25 kVA-125 kVA)-FM
User Manual
Alarm
ID
(Alarm
ID-Caus
e ID)
0088-1
0089-1
0090-1
0090-2
0356
0359
0332
0334
Issue 02 (2017-10-23)
Alarm Severit
Name y
bypass
Rack Critical
address
conflict
Rack Minor
output
overload
Dry contact Critical
board fault
Battery Minor
Mode
No power Warning
supplied
Output Minor
disabled
BSC Warning
master
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Cause Solution
UPS is not bypass mode.
normal, and
transfers to
bypass mode.
The Check the rack address setting.
configured
rack address
conflicts with
another one.
 
The load Check the load and remove
is some loads or expand the UPS
excessive. power capacity if the UPS is
overloaded.

The rack

capacity Check that the configured rack
setting is capacity meets requirements.
not
appropriat
e.
I2C Replace the dry contact board
communicati MUE05A.
on with the
dry contact
board
MUE05A
fails.
I2C Replace the dry contact board
communicati MUE06A.
on with the
dry contact
board
MUE06A
fails.
The UPS is The running status is displayed. See
working in details about how to handle other
battery mode. alarms.
No power is The running status is displayed. See
supplied. details about how to handle other
alarms.
The output is The running status is displayed. See
disabled. details about how to handle other
alarms.
BSC master The running status is displayed. No
system. further measures are required.
C Alarm List
243