Huawei UPS5000-E-****-FM series User Manual page 177

UPS5000-E-(25 kVA-125 kVA)-FM
User Manual
After setting network parameters, connect the UPS to the network over a network cable, which enables
remote management of the UPS. If remote management is not required, retain the default network
parameter settings.
4.
System parameter settings affect UPS operation. Before setting system parameters, note the
following:
Issue 02 (2017-10-23)
Figure 5-5 Network Param. screen
On the System Param. screen, select Single (default value) or Parallel, as shown in
Figure 5-6. Set the Output voltage level, Output frequency, Battery capacity, and
Number of cells, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-7.
5 Operations
169