Hex Trace; Print Quality Pages; A5 Loading; Reduced Curl - Lexmark MS310 4514-220 Service Manual

Hex Trace

Hex Trace helps in isolating printing problems when unexpected characters print or characters are missing.
This helps determine if there is a problem with the language interpreter or the cable by providing information
about what the printer is receiving.
Available options:
•
Off
•
On
To enter Hex Trace mode, select On and then POR the printer.
To exit this mode, POR the printer.

Print Quality Pages

This prints a report that contains a limited set of the information that appears in the Diagnostics menu version
of the Print quality pages report.

A5 Loading

This determines the orientation used when printing on A5 paper.
Available options:
•
Long Edge—The printer will print A5-size paper in the long-edge feed orientation from all trays.
•
Short Edge—The printer will print A5-size paper in the short-edge feed orientation from all trays.

Reduced Curl

When on, this setting significantly reduces throughput and should be activated only as a last resort to solve
paper curl problems. The printer uses this mode only when the media type is set to Paper.
Available options:
•
Off
•
On

Demo Mode

Demo mode is often used in retail environments to highlight printer capabilities. The printer stores
demonstration files in the resident demo file of the base RIP firmware and in any supported optional memory
devices.
When this mode is activated, the printer ignores all print jobs sent to it other than the demo file selected by the
user. Each demo file consists of one or more printed pages.
Available options:
•
Activate—The printer boots into Demo mode after each power cycle.
•
Deactivate—The printer boots into normal mode.
Service menus
165
4514-2xx