Standard Parallel Port Disabled [56]; Standard Usb Port Disabled [56] - Lexmark MS310 4514-220 Service Manual

Standard parallel port disabled [56]

Try one or more of the following:
•
From the printer control panel, press
Note: The printer discards any data received through the parallel port.
•
Set the Parallel Buffer to Auto.
–
If the printer is on a network, then access the Embedded Web Server.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
Print a network setup page or menu settings page, and then locate the IP address in the
TCP/IP section.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Network/Ports > Parallel.
In the Parallel Buffer field, enter 2.
3
4
Click Submit.
–
If the printer is connected to a computer by a USB or parallel cable, then access the Parallel menu
through the Local Printer Settings Utility for Windows or through Printer Settings for Macintosh.

Standard USB port disabled [56]

Try one or more of the following:
•
From the printer control panel, press
Note: The printer discards any data received through the USB port.
•
Set the USB Buffer to Auto:
–
If the printer is on a network, then access the Embedded Web Server.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
Print a network setup page or menu settings page, and then locate the IP address in the
TCP/IP section.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Network/Ports > Standard USB.
In the USB Buffer field, enter 2.
3
4
Click Submit.
–
If the printer is connected to a computer by a USB or parallel cable, then access the Standard USB
menu through the Local Printer Settings Utility for Windows or through Printer Settings for
Macintosh.
to continue printing.
to continue printing.
Diagnostics and troubleshooting
113
4514-2xx