Table of Contents
Advertisement
Actions
Step 8
Reseat the connections.
Does the problem remain?
Step 9
Note: Poor electrical contact to the photoconductor is the most
likely source of a full page background defect.
a
Remove any contamination from the photoconductor charge
contact (C) on the right side of the frame.
b
Perform a print test.
Does the problem remain?
Step 10
Check if the photoconductor charge contact is bent, damaged, or
not in proper contact with the imaging unit.
Is the contact free from damage and in proper contact with the
imaging unit?
Step 11
Replace the power supply. See
page
239.
Does the problem remain?
Blank pages check
C
"Power supply removal" on
Diagnostics and troubleshooting
Yes
Go to step 9.
Go to step 10.
Go to step 11.
Contact the next
level of support.
47
4514-2xx
No
The problem is
solved.
The problem is
solved.
Contact the next
level of support.
The problem is
solved.
Advertisement
Table of Contents
