Table of Contents
Advertisement
Error code Description
111.60
Closed-loop printhead sweep error, check sweep
accuracy state.
111.61
Printhead drive control out of range due to an
external event beyond what the control is
designed to handle.
111.62
Closed-loop printhead error, off-resonant PI effort
state.
111.63
Timed out on POR sweep.
111.64
Attempted to exceed open loop drive limits.
111.65
Attempted to exceed open loop drive limits.
111.66
Failed alignment of printhead.
111.67
Attempted to exceed open loop drive limits.
111.68
Too many fake HSYNCs while aligning printhead.
111.69
Attempted to exceed open loop drive limits.
LSU service check
Action
Step 1
Check the LSU cables JVIDEO1 and JGLV1 for proper connection.
Are they properly connected?
Step 2
Inspect the LSU cables and connectors.
Are they free of damage?
Action
Go to
Diagnostics and troubleshooting
126
"LSU service check" on page
Yes
No
Go to step 2.
Reseat the cables.
Replace the LSU.
Replace the
See
"Laser scanning
controller board. See
unit (LSU) removal"
"Controller board
on page
264.
removal" on
page
4514-2xx
126.
210.
Advertisement
Table of Contents
