Siemens Sitrans P500 Operating Instructions Manual page 76

Operate
6.2 Parameter description
"1.1.7.3 Mass Flow Unit"
Factory setting:
Adjustment range:
Purpose:
Description:
"1.1.7.4 Mass Flow LRV"
Factory setting:
Adjustment range:
Purpose:
Description:
"1.1.7.5 Mass Flow URV"
Factory setting:
Adjustment range:
Purpose:
Description:
"1.1.8 Level"
Note
This menu item is only visible if "Level" was selected in "1.1.2 PV Select" (Page 69).
See also
Measuring mode "Level" (Page 145)
76
kg/s
g/s, g/min, g/h, kg/s, kg/min, kg/h, kg/day, MetTon/min, MetTon/h, Met-
Ton/day, lb/s, lb/min, lb/day, ShTon/min, ShTon/h, ShTon/day, LTon/h,
LTon/day
Selection of the unit for the mass flow measurement type
This parameter allows you to select the unit for the mass flow measurement
type. The parameters associated with this unit are automatically converted
into the new unit.
0 kg/s
Freely selectable numeric value
Setting the start of scale value
This parameter allows the start of scale value for the mass flow scaling to be
set. The value that is set for "1.1.3.1.2 Setting LRV" (Page 69) or "1.1.3.2.2
Set LRV with Pressure" (Page 70) is automatically assigned to this value.
The start of scale value is expressed in the units you selected under "1.1.7.3
Mass Flow Unit" (Page 76).
100 kg/s
Freely selectable numeric value
Setting the full scale value
This parameter allows the full scale value for the mass flow scaling to be
set. The value that is set for "1.1.3.1.3 Setting URV" (Page 70) or "1.1.3.2.3
Set URV with Pressure" (Page 71) is automatically assigned to this value.
You can enter the end of scale value in the unit selected under "1.1.7.3
Mass Flow Unit" (Page 76).
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09