Siemens Sitrans P500 Operating Instructions Manual page 129

Purpose:
Description:
"3.5.2.5 Warn.-Alarm active"
Factory setting:
Adjustment range:
Purpose:
Description:
See also
Calibration timer and service timer (Page 164)
"3.5.2.6 Acknowledge/Reset"
Note
This parameter is displayed only if "3.5.2.5 Warn.-Alarm active" (Page 129) is not set to
"Off".
Adjustment range:
Purpose:
Description:
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
Set delay for a sensor service alarm
This parameter sets the delay period for the sensor service alarm. The delay
period is the time which elapses between a sensor service request and a
sensor service alarm.
Off
Off
•
Timer on
•
Request on
•
Request and alarm on
•
Activate/ deactivate the sensor service request or alarm
This parameter sets whether you have activated a sensor service request
and / or a sensor service alarm.
"Off" Neither a sensor service request/ alarm nor the timer is
activated.
"Timer on" The timer is activated.
"Request on" A sensor service request is activated.
"Request and A sensor service request and alarm are activated.
alarm on"
Acknowledge Warning
•
Acknowledge Alarm
•
Reset Timer
•
Acknowledging sensor service requests and alarms, and resetting the timer
This parameter allows you to acknowledge an outstanding request or alarm.
Furthermore, "3.5.2.2 Timer" (Page 128) and "3.5.2.3 Warning" (Page 128)
can also be reset.
Operate
6.2 Parameter description
129