Siemens Sitrans P500 Operating Instructions Manual page 121

Purpose:
Description:
"2.6.2.6 Capillary Length"
Factory setting:
Adjustment range:
Purpose:
Description:
"2.6.3 Process Connection"
"2.6.3.1 Process Connection"
Factory setting:
Purpose:
Description:
"2.6.3.2 Drain Vent Material"
Factory setting:
Purpose:
Description:
"2.6.3.3 Drain Vent Position"
Factory setting:
Display:
Purpose:
Description:
"2.6.3.4 Flange Bolts Material"
Factory setting:
Purpose:
Description:
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
Display/ change the tube length
This parameter records the tube length as a numeric value with the associ-
ated unit.
e.g. 1600 mm, or as shown on the order
16 characters
Display/ change the remote seal capillary length
This parameter records the remote seal capillary length as a numeric value
with the associated unit.
e.g. 1/4-18 NPT, or as shown on the order
Display the type of process connection
This parameter records the type of process connection.
e.g. stainless steel 14404, or as shown on the order
Display the bleed valve material
This parameter records the material of the bleed valve.
compared to the process connection
opposite process connection
•
on the side of the process flange
•
Displays the bleed valve plug position
This parameter records the position of the bleed valve plug.
e.g. stainless steel, or as shown on the order
Displays the process flange screw material
This parameter records the material of the process flange screws.
Operate
6.2 Parameter description
121