Diagnostics; 3.1 Alarm List; Identification - Siemens Sitrans P500 Operating Instructions Manual

6.2.4

"3 Diagnostics"

6.2.4.1

"3.1 Alarm list"

Display:
Purpose:
Description:
6.2.4.2

"3.2 Identification"

In this submenu you define the data that you need to identify your device. A distinction is
made between data you can set yourself and values that are preset in the factory. The
default values are write-protected and cannot be changed by the user. The corresponding
allocation is set out below:
Menu entry Designation
3.2.1 TAG
3.2.2 Long Tag
3.2.3 Description
3.2.4 Message
3.2.5 Installation Date
3.2.6 Pressure transmitter
Manufacturer_id
3.2.6.1
•
Device Type
3.2.6.2
•
Order Number
3.2.6.3
•
Order-No Extension
3.2.6.4
•
Type of pressure trans-
3.2.6.5
•
mitter
Fabrication Number
3.2.6.6
•
Final Assembly No
3.2.6.7
•
Firmware DAC
3.2.6.8
•
Firmware COMM
3.2.6.9
•
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
List of all alarms, starting with the most serious.
View of all alarms with descriptions.
Only one alarm - the most serious one - is displayed in the measured value
view. The alarm list lists all alarms.
Definitions, causes and actions of all alarms can be found found in section
Alarm, error and system messages (Page 185).
Adjusta- Pre-set Factory setting
ble
X - in accordance with the order
X - in accordance with the order
X - AAAAA
X - AAAAA
X - dd.mm.yyyy
- X Siemens
- X SITRANS P500
- X e.g. 7MF5303...
- X e.g. A30, J01, Y21
- X e.g. Diff. Pres PN160
- X in accordance with the measuring cell selection/
device manufacture
- X in accordance with the measuring cell selection/
device manufacture
- X in accordance with the measuring cell selection/
device manufacture
- X in accordance with the measuring cell selection/
device manufacture
6.2 Parameter description
1)
1)
1)
Operate
123