Quickstart; 1.1 Commissioning - Siemens Sitrans P500 Operating Instructions Manual

6.2.2

"1 Quickstart"

6.2.2.1

"1.1 Commissioning"

"1.1.1 " in preparation
"1.1.2 PV Select"
Factory setting:
Setting range:
Purpose:
Description:
"1.1.3 Measuring Range"
"1.1.3.1 Setting Blind"
"1.1.3.1.1 Pressure Unit"
Factory setting:
Setting range:
Purpose:
Description:
"1.1.3.1.2 Setting LRV"
Factory setting:
Setting range:
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
Pressure
Pressure
•
Volume flow
•
Mass flow
•
Level
•
Volume
•
Mass
•
User characteristic
•
Selection of the measuring mode
Select the measuring mode with the measuring mode switch. Depending on
the selection made here, menu commands that are not relevant can be
shown or hidden. The values are defined in the following menu commands.
mbar
inH O, inHg, ftH O, mmH
2 2 2
HPa, Torr, atm, MPa, inH
2
Selection of the unit for the pressure parameter
This parameter allows you to select the unit for the measured pressure
value. The parameters associated with this unit are automatically converted
to the new unit.
0 mbar, or as specified when ordered
Sensor limits
6.2 Parameter description
O, mmHg, psi, bar, mbar, g/cm
O (4 °C), mmH O (4 °C)
2
Operate
, kg/cm , Pa, kPa,
2 2
69