Siemens Sitrans P500 Operating Instructions Manual page 128

Operate
6.2 Parameter description
"3.5.2 Sensor-Service-Intervall"
"3.5.2.1 Status"
Note
This parameter is displayed only if there is an outstanding sensor service request or alarm.
Display:
Purpose:
Description:
"3.5.2.2 Timer"
Factory setting:
Display:
Purpose:
Description:
See also
Calibration timer and service timer (Page 164)
"3.5.2.3 Warning"
Factory setting:
Adjustment range:
Purpose:
Description:
"3.5.2.4 Alarm Delay"
Factory setting:
Setting range:
128
Request acknowledged
•
Alarm acknowledged
•
Request outstanding
•
Alarm outstanding
•
Displays the sensor service status
This parameter displays outstanding sensor service requests and alarms.
0
In [h]
Displays the status of the sensor service timer
This parameter displays the time that has elapsed since the start of the
sensor service timer.
0
In [h]
Setting the time after which a sensor service request is made
This parameter sets the time after which a sensor service request will be
made.
0
In [h]
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09