Table of Contents
Advertisement
ROPE ASSEMBLY GUIDE
For the clients that have chosen the reformer equipped with ropes and risers, the
head end of the frame will have the retractable risers preinstalled for use with
ropes.
All ropes and handles must be secured before use. These are the moving parts
that are frequently interchanged with other accessories and they are essential to
providing the fluid movement. Before use, be sure that the ropes are not twisted
so they can easily move through the pulleys.
Preparing the Retractable Risers for use:
Fig. 11
Fig. 12
Fig. 13
CO LLEC TI O N OWN E R' S MANUAL
TH E A RTI S TRY
TM
The retractable risers come
preinstalled on the reformer to make
installation simple and easy. (Fig 11)
1. Before use, rotate the risers 90
degrees to the vertical position on the
frame with the pulleys at the top of the
riser. (Fig 12)
2. Secure the riser before use by
screwing the knobs completely into
the steel plates behind the riser.
(Fig 13)
IMPORTANT: You must ensure the
knobs are fully tightened and secure
before use to prevent injury and/or
damage to your equipment.
To change the reformer to mat mode the
risers must be folded down.
3. Unscrew the knob out of the steel
plate until the threads are disengaged.
Note that the knob will stay connected
to the riser.
4. Rotate the risers towards the center of
the reformer to the horizontal position.
(See Fig 5 for reference)
See page 27 for twin mat installation.
19
Hide quick links:
Advertisement
Table of Contents
