Vertically Storing The Fit; Tm Reformer - Peak Pilates fit reformer Owner's Manual

OPERATION
Drop the risers into their lowest position.
4
For the upper machine: Hook each double loop strap onto its respective storage post located
5
behind the shoulder pad.
For the lower machine: Slide the double loop straps off of the storage posts and drop into the
6
well of the reformer.
Hook the foot strap into its storage loop.
7
With one person at each end, lift the reformer. The footbar can be used as a handle for lifting only
8
when fully engaged in the storage position.
Nest the units by lining up the head end and foot end legs respectively and lowering the top unit into
9
the well of the machine below.
CAUTION
VERIFY THAT THE ALL FOUR STACKING BUMPERS OF THE UPPER UNIT TOUCH THE TOPS OF THE LOWER
UNIT RAILS OF THE BEFORE ATTEMPTING TO STACK ADDITIONAL MACHINES. DO NOT STACK OVER 3 UNITS
HIGH FOR STABILITY.

Vertically Storing the fit

To vertically store the fit reformer:
Place the gear bar and gear block in the -1 position.
1
Make sure that at least the center spring is hooked onto the gear bar.
2
Place the foot bar in its highest position.
3
Hook the foot strap into its storage loop.
4
14
fit reformer owner's manual
™
reformer
™