Table of Contents
Advertisement
Unpack the Carton
Open the box. Carefully remove all parts and verify that all components and accessories are included.
1
Place protective cover on the floor (so the aluminum frame will not be scratched). With one person at
2
each end of the reformer, lift the unit out of the box and place on the floor.
WARNING
!
SINCE NO SPRINGS ARE ATTACHED, THE CARRIAGE IS NOT LOCKED IN POSITION AND MAY
START TO ROLL, BE EXTRA CAUTIOUS WHEN MOVING THE UNIT.
Tip the reformer onto its side, exposing the underside of the frame.
3
Assemble the Legs
Attach the foot end leg to the reformer frame. Make
4
sure that the wheels are facing toward the foot end of
the machine. Secure using Button Head Screws and
washers, hand tighten all eight screws on each leg.
Repeat the process for head end leg.
5
Go back and fully tighten all screws (torque to 12 ft-lbs
6
or 16 N-m) with the provided 4mm allen wrench.
10
fit
reformer owner's manual
™
PeakPilates Fit Owners Manual-2021.indd 10
PeakPilates Fit Owners Manual-2021.indd 10
ASSEMBLY
Foot
Button
Head
Screws
8/9/21 9:42 AM
8/9/21 9:42 AM
Advertisement
Table of Contents
