Peak Pilates ARTISTRY SERIES Assembly And Owner's Manual page 18

18
Fig. 8
Fig. 9
Fig. 10
4. Unscrew the black knobs on the
underside of the carriage (on each side of
the headrest) to reveal the screw post.
Note: If top mounting of the knob is
desired, the screw post can be unbolted,
flipped and installed in the opposite
direction.
5. Feed the loose ends of the straps
through the slots at the head of the
carriage. Pull the straps to remove any
slack. Align the nearest hole in the straps
with each screw posts. Slide the selected
hole in each strap over each screw post.
Note, the straps MUST be fed through the
oval holes in the carriage BEFORE being
anchored by the post and knob. (Fig 8)
6. Re-screw the black knobs back onto the
screw posts, tightening the knobs against
the straps until they are secure. (Fig 9)
7. Thread the loose ends of the straps
through the cutouts underneath metal
frame on the carriage to prevent the ends
of the straps from dragging along the
ground.
8. Finished assembly. (Fig 10)